目次
attributes - get/set subroutine or variable attributes
attributes - 変数若しくは関数の属性を取得/設定
sub foo : method ;
my ($x,@y,%z) : Bent = 1;
my $s = sub : method { ... };
use attributes (); # optional, to get subroutine declarations
my @attrlist = attributes::get(\&foo);
use attributes 'get'; # import the attributes::get subroutine
my @attrlist = get \&foo;
Subroutine declarations and definitions may optionally have attribute lists
associated with them. (Variable my declarations also may, but see the
warning below.) Perl handles these declarations by passing some information
about the call site and the thing being declared along with the attribute
list to this module. In particular, the first example above is equivalent to
the following:
関数の宣言と定義ではそれに関連した属性のリストを任意で持つことが
できます. (変数の my 宣言もできますが, 後述の警告も参照して
ください.) Perl はこれらの宣言を, 呼び出す場所と属性リストと
ともに宣言されようとしているものの情報をこのモジュールに渡すことで
これらの宣言を処理します. 特に, 上の最初の例は次のものと等価です:
use attributes __PACKAGE__, \&foo, 'method';The second example in the synopsis does something equivalent to this:
2番目の例は次と等価です:
use attributes ();
my ($x,@y,%z);
attributes::->import(__PACKAGE__, \$x, 'Bent');
attributes::->import(__PACKAGE__, \@y, 'Bent');
attributes::->import(__PACKAGE__, \%z, 'Bent');
($x,@y,%z) = 1;Yes, that's a lot of expansion.
ここでは多くの展開がなされます.
WARNING: attribute declarations for variables are still evolving. The semantics and interfaces of such declarations could change in future versions. They are present for purposes of experimentation with what the semantics ought to be. Do not rely on the current implementation of this feature.
警告: 変数に対する属性の宣言はまだ進歩の途上にあります. これらの宣言の意味とインターフェースは今後のバージョンで 変更される可能性があります. これらは今後くる意味を体験する のを目的として提供されています. この機能の現在の実装には 頼らないでください.
There are only a few attributes currently handled by Perl itself (or directly by this module, depending on how you look at it.) However, package-specific attributes are allowed by an extension mechanism. (See "Package-specific Attribute Handling" below.)
現在 Perl 自身(若しくは見方によってはこのモジュールが直接)で 処理される属性はわずかです. しかし, あるパッケージ用の属性という ものが拡張メカニズムとして使うことができます. (後述の "Package-specific Attribute Handling"を参照してください.)
The setting of subroutine attributes happens at compile time.
Variable attributes in our declarations are also applied at compile time.
However, my variables get their attributes applied at run-time.
This means that you have to reach the run-time component of the my
before those attributes will get applied. For example:
関数の属性の設定はコンパイル時に起きます. our 宣言での変数属性も
コンパイル時に適用されます. しかし, my 変数は実行時に属性の
適用が行われます. これは属性が適用される前に my の実行時構成に
到達しなければならないことを意味します. 例えば:
my $x : Bent = 42 if 0;
will neither assign 42 to $x nor will it apply the Bent attribute
to the variable.
は $x に 42 を代入することも変数に Bent 属性が適用される
こともありません.
An attempt to set an unrecognized attribute is a fatal error. (The
error is trappable, but it still stops the compilation within that
eval.) Setting an attribute with a name that's all lowercase
letters that's not a built-in attribute (such as "foo") will result in
a warning with -w or use warnings 'reserved'.
知らない属性の設定は致命的なエラーとなります. (このエラーは
トラップできますが, その eval 野中でコンパイルは停止します.)
全てが小文字からなるけれど組み込みの属性ではない名前(例えば”foo")
を設定すると -w 若しくは use warnings 'reserved' では
警告を発生します.
The following are the built-in attributes for subroutines:
以下のものは関数用の組み込み属性です
5.005 threads only! The use of the "locked" attribute currently only makes sense if you are using the deprecated "Perl 5.005 threads" implementation of threads.
5.005 スレッドのみです! "locked" 属性の使用は今だと 廃止された "Perl 5.005 スレッド" によるスレッド実装を 使っているときにだけ意味を持ちます.
Setting this attribute is only meaningful when the subroutine or
method is to be called by multiple threads. When set on a method
subroutine (i.e., one marked with the method attribute below),
Perl ensures that any invocation of it implicitly locks its first
argument before execution. When set on a non-method subroutine,
Perl ensures that a lock is taken on the subroutine itself before
execution. The semantics of the lock are exactly those of one
explicitly taken with the lock operator immediately after the
subroutine is entered.
この属性を設定するのはその関数若しくはメソッドが複数のスレッドから
呼び出されるときにだけ意味があります. メソッド関数(つまり後述の
method 属性を持っているもの）に対して設定したときには
Perl はその呼び出し時には実行の前に最初に引数を暗黙にロック
することを保証します. ロックの意味は関数に入った直後に lock
演算子で明示的に行うのとちょうど同じです.
method
Indicates that the referenced subroutine is a method. This has a meaning when taken together with the locked attribute, as described there. It also means that a subroutine so marked will not trigger the "Ambiguous call resolved as CORE::%s" warning.
参照された関数はメソッドであると提示します. これは先に説明した locked 属性と一緒に使うときに意味があります. これでマーク された関数は "Ambiguous call resolved as CORE::%s" (CORE::%s として処理される曖昧な呼び出し）警告は発生させません.
Indicates that the referenced subroutine is a valid lvalue and can be assigned to. The subroutine must return a modifiable value such as a scalar variable, as described in perlsub [CPAN].
参照された関数は左辺値(lvalue)として有効であり代入可能である ことを示します. 関数は perlsub [CPAN] で説明されているように 変更することのできる値, 例えばスカラー変数等を返さなければ なりません.
For global variables there is unique attribute: see perlfunc 内 "our" [CPAN].
グローバル変数のために unique 属性があります:
perlfunc 内 "our" [CPAN] を参照してください.
The following subroutines are available for general use once this module has been loaded:
以下の関数は一般的な使用のためにこのモジュールをロード したときに提供されます.
This routine expects a single parameter--a reference to a
subroutine or variable. It returns a list of attributes, which may be
empty. If passed invalid arguments, it uses die() (via Carp::croak [CPAN])
to raise a fatal exception. If it can find an appropriate package name
for a class method lookup, it will include the results from a
FETCH_type_ATTRIBUTES call in its return list, as described in
"Package-specific Attribute Handling" below.
Otherwise, only built-in attributes will be returned.
This routine expects a single parameter--a reference to a subroutine or variable. It returns the built-in type of the referenced variable, ignoring any package into which it might have been blessed. This can be useful for determining the type value which forms part of the method names described in "Package-specific Attribute Handling" below.
Note that these routines are not exported by default.
WARNING: the mechanisms described here are still experimental. Do not rely on the current implementation. In particular, there is no provision for applying package attributes to 'cloned' copies of subroutines used as closures. (See perlref 内 "Making References" [CPAN] for information on closures.) Package-specific attribute handling may change incompatibly in a future release.
When an attribute list is present in a declaration, a check is made to see
whether an attribute 'modify' handler is present in the appropriate package
(or its @ISA inheritance tree). Similarly, when attributes::get is
called on a valid reference, a check is made for an appropriate attribute
'fetch' handler. See "EXAMPLES" to see how the "appropriate package"
determination works.
The handler names are based on the underlying type of the variable being declared or of the reference passed. Because these attributes are associated with subroutine or variable declarations, this deliberately ignores any possibility of being blessed into some package. Thus, a subroutine declaration uses "CODE" as its type, and even a blessed hash reference uses "HASH" as its type.
The class methods invoked for modifying and fetching are these:
This method receives a single argument, which is a reference to the variable or subroutine for which package-defined attributes are desired. The expected return value is a list of associated attributes. This list may be empty.
This method is called with two fixed arguments, followed by the list of attributes from the relevant declaration. The two fixed arguments are the relevant package name and a reference to the declared subroutine or variable. The expected return value is a list of attributes which were not recognized by this handler. Note that this allows for a derived class to delegate a call to its base class, and then only examine the attributes which the base class didn't already handle for it.
The call to this method is currently made during the processing of the declaration. In particular, this means that a subroutine reference will probably be for an undefined subroutine, even if this declaration is actually part of the definition.
Calling attributes::get() from within the scope of a null package
declaration package ; for an unblessed variable reference will
not provide any starting package name for the 'fetch' method lookup.
Thus, this circumstance will not result in a method call for package-defined
attributes. A named subroutine knows to which symbol table entry it belongs
(or originally belonged), and it will use the corresponding package.
An anonymous subroutine knows the package name into which it was compiled
(unless it was also compiled with a null package declaration), and so it
will use that package name.
An attribute list is a sequence of attribute specifications, separated by
whitespace or a colon (with optional whitespace).
Each attribute specification is a simple
name, optionally followed by a parenthesised parameter list.
If such a parameter list is present, it is scanned past as for the rules
for the q() operator. (See perlop 内 "Quote and Quote-like Operators" [CPAN].)
The parameter list is passed as it was found, however, and not as per q().
Some examples of syntactically valid attribute lists:
switch(10,foo(7,3)) : expensive
Ugly('\(") :Bad
_5x5
locked methodSome examples of syntactically invalid attribute lists (with annotation):
switch(10,foo() # ()-string not balanced
Ugly('(') # ()-string not balanced
5x5 # "5x5" not a valid identifier
Y2::north # "Y2::north" not a simple identifier
foo + bar # "+" neither a colon nor whitespaceNone.
The routines get and reftype are exportable.
The :ALL tag will get all of the above exports.
Here are some samples of syntactically valid declarations, with annotation
as to how they resolve internally into use attributes invocations by
perl. These examples are primarily useful to see how the "appropriate
package" is found for the possible method lookups for package-defined
attributes.
Code:
package Canine;
package Dog;
my Canine $spot : Watchful ;Effect:
use attributes ();
attributes::->import(Canine => \$spot, "Watchful");Code:
package Felis;
my $cat : Nervous;Effect:
use attributes ();
attributes::->import(Felis => \$cat, "Nervous");Code:
package X;
sub foo : locked ;Effect:
use attributes X => \&foo, "locked";Code:
package X;
sub Y::x : locked { 1 }Effect:
use attributes Y => \&Y::x, "locked";Code:
package X;
sub foo { 1 }
package Y;
BEGIN { *bar = \&X::foo; }
package Z;
sub Y::bar : locked ;Effect:
use attributes X => \&X::foo, "locked";This last example is purely for purposes of completeness. You should not be trying to mess with the attributes of something in a package that's not your own.
perlsub 内 "Private Variables via my()" [CPAN] and perlsub 内 "Subroutine Attributes" [CPAN] for details on the basic declarations; attrs [CPAN] for the obsolescent form of subroutine attribute specification which this module replaces; perlfunc 内 "use" [CPAN] for details on the normal invocation mechanism.